7 Source icon display part

8 Function item display

9 G-Analyzer display part

5Exit display control mode Press the [6] ("RTN") button.

•Under the display type other than "Display Type D", the function item is not displayed. When you select the display type other than "Display Type D", press [1] to [6] buttons or [NEXT] button. The function item will be displayed approximately 5 seconds.

•The indicator is displayed when the display type is set to "Display Type C" or "Display Type D".

•Change the information by the Display Type. Refer to the page on the following table for the methods to alternate by the Display Type.

Display Type

A

B

C

D

E

Graphic 1

15 15 — — —

Text 2

—

16

—

—

—

Upper 4

—

—

18

18

—

Middle 5

—

—

20

—

—

Lower 6

—

—

20

20

—

G-Analyzer 9

—

—

—

—

22

Display Type A/ Display Type B

Graphic part Display Switching

Changing the graphic Display.

1Select the key function section Press the [NEXT] button.

Repeatedly press the button until "DISP" is displayed above the [2] button.

Refer to <Notes on Multi-function Key System> (page 9).

2Enter display control mode Press the [2] ("DISP") button.

3Select the display mode Press the [1] ("MODE") button.

4Select the display Type

Push the Control knob towards [4] or [¢].

Select the "Display Type A"/ "Display Type B" display.

5Select the graphic display Press the [3] ("Graph") button.

6Select the graphic part display

Push the Control knob towards [4] or [¢].

Each time you push the knob, the graphic display alternates between the displays shown in the table below.

Graphic display Movie 1

Movie 2

Movie 3 (KDC-X790 only) *Downloaded movie

Wallpaper & *Downloaded Wallpaper

•* Function of the KDC-X790

•* For Download movie and Download Wall Paper, refer to <Picture downloading> (page 49).

7Exit display control mode Press the [6] ("RTN") button.

•The setting of this function is available while "Display Type A"/ "Display Type B" is selected for the Display mode.

English 15