Function of the
In Standby mode
Synchronize Clock
Synchronizing the RDS station time data and this unit’s clock.
Display | Setting |
"SYNC : OFF" | Adjust the time manually. |
"SYNC : ON" | Synchronizes the time. |
• It takes 3 to 4 minutes to synchronize the clock.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI : ON" | LED flashes. |
"DSI : OFF" | LED OFF. |
In Standby mode
Selectable Illumination
Selecting the button illumination color as green or red.
Display | Setting |
"Button : Red" | The illumination color is red. |
"Button : Green" | The illumination color is green. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"Display : ON" | Keeps the display on. |
"Display : OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 51) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Faceplate Angle Adjustment
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"Dimmer : ON" | The display dims. |
"Dimmer : OFF" | The display doesn’t dim. |
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP : ON" | The |
"AMP : OFF" | The |
| English 41 |