Menu system
Function of the
In Audio file source
Supreme Setting
When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.
Display | Setting |
"Supreme : ON" | Plays sound using the Supreme function. |
"Supreme : OFF" | Plays the original sound stored in the audio file. |
•The sound effect may be imperceptible depending on the relationship between the audio file format and setting.
Function of the
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"AMP Bass : Flat" | Bass boost level is flat. |
"AMP Bass : +6" | Bass boost level is low (+6dB). |
"AMP Bass : +12" | Bass boost level is mid (+12dB). |
"AMP Bass : +18" | Bass boost level is high (+18dB). |
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass : +18" will not work correctly even if it is selected.
Function of the
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display | Setting |
"AMP FREQ : Normal" | Boost with the normal central frequency. |
"AMP FREQ : Low" | Drop the normal central frequency 20%. |
Function of the
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1Select AMP Control mode
Push the Control knob towards [FM] or [AM]. Select the "AMS Control" display.
2Enter AMP Control mode
Press the Control knob for at least 1 second.
3Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM].
•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
4Adjust the AMP Control item
Push the Control knob towards [4] or [¢].
5Exit AMP Control mode Press the [MENU] button.
•You cannot use the LX AMP operation during standby mode.
46 English