Category and Channel Search

Selecting the channel and category you want to receive.

1Enter Category and Channel Search mode Press the Control knob.

2Select the Category

Push the Control knob towards [FM] or [AM].

•It is the item when the category of Middle text display part is selected.

3Select the Channel

Push the Control knob towards [4] or [¢].

•You cannot Channel search until the category information is acquired.

Cancelling Category and Channel Search mode

Press the Control knob.

Function of remote control

Direct Access Tuning

Entering the channel and tuning.

1Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

2Enter the channel

Press the number buttons.

3Do Channel Search

Push the Control knob towards [4] or [¢].

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.

•You can set up until Channel number 223.

•If there is no signal in the input Channel, "No Channel" appears. (KTC-SR901: optional accessory)

•You cannot search for a channel number which is not broadcasting.

(KTC-SR902/KTC-SR903: optional accessory)

•If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears.

Selecting the Preset Band

Push the Control knob toward [FM].

Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4.

Channel Preset Memory

Putting the channel in the memory.

1Select the preset band

Push the Control knob toward [FM].

2Select the channel to put in the memory Push the Control knob towards [4] or [¢].

3Select the key function section Press the [NEXT] button.

Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons.

Refer to <Notes on Multi-function Key System> (page 9).

4Put the channel in the memory

Press the desired [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time. On each band, you can put 1 channel in the memory on each [1] — [6] button.

•Only the channel number is stored. Category information is not stored.

English 35