Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1Select the band
Press the [FM] or [AM] button.
2Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
"– – –
3Enter the frequency
Press the number buttons on the remote control.
Example:
Desired frequency | Press button |
92.1 MHz (FM) | [0], [9], [2], [1] |
810 kHz (AM) | [0], [8], [1], [0] |
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
Station Preset Memory
Putting a station in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].
3Select the key function section Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons.
Refer to <Notes on
4Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
Preset Tuning
Recalling the stations in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Select the key function section Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons.
Refer to <Notes on
3Recall the station
Press the desired [1] — [6] button.
English 25