Other than Standby mode

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 50).

1Select the source Press the [SRC] button.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Audio Preset mode

Push the Control knob towards [FM] or [AM]. Select the "Audio Preset" display.

4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset Recall

Push the Control knob towards [FM] or [AM]. Select the "Recall" display.

6Recall the Audio Preset

Press the Control knob for at least 2 seconds. The "Recall" display blinks 1 time.

7Exit Audio Preset mode Press the [MENU] button.

The User memory of <System Q> (page 11) is changed to the value which was recalled.

The source tone memory item of <Audio Control> (page 11) is changed to the value which was recalled by the selected source.

In Standby mode

Demonstration mode Setting

Sets the demonstration mode.

1Select the Demonstration mode

Push the Control knob towards [FM] or [AM]. Select the "DEMO Mode" display.

2Set the Demonstration mode

Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.

Display

Setting

"DEMO Mode : ON"

The Demonstration mode function is ON.

"DEMO Mode : OFF"

Exit Demonstration mode (Normal mode).

English 51