Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1Receive/play the station/disc you want to attach a title to
•A title cannot be attached to MD or Audio file media.
2Enter Menu mode
Press the [MENU] button for at least 1 second. "MENU" is displayed.
3Select Name set mode
Push the Control knob towards [FM] or [AM]. Select the "Name Set" display.
4Enter Name set mode
Press the Control knob for at least 1 second.
5Move the cursor to the enter character position
Push the Control knob towards [4] or [¢].
6Select the character type Press the Control knob.
Each time you press the knob, the character type alternates between the types shown in the table below.
Character type Alphabet upper case Alphabet lower case Numbers and symbols
Special characters (Accent characters)
7Select the characters
Push the Control knob towards [FM] or [AM].
•Enter characters by using a remote control with numbers buttons.
Example: If you are entering "DANCE".
Character | Button | Times pressed |
"D" | [3] | 1 |
"A" | [2] | 1 |
"N" | [6] | 2 |
"C" | [2] | 3 |
"E" | [3] | 2 |
8Repeat steps 5 through 7 and enter the name.
9Exit Menu mode
Press the [MENU] button.
•When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes.
•Memory numbers
-FM/ AM: 30 stations
-Internal CD player: 10 discs
-External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual.
•Change the title of station/CD by the same operation used to name it.
English 23