Kenwood KR-V888D Preparing for surround sound, 4Adjust the volume levels of each speaker

	Preparing for surround sound
	KR-V888D (En/T)
4Adjust the volume levels of each speaker.	1 7

Listen to the test tone and adjust the volume level of each speaker so that they all produce the test tone at the same volume level.

SET UP				MAIN	3
SP.SLCT	SP.LVL		SP.DIST	INLVL
			SPEAKER
			LEVEL
				TEST TONE
			AUTO
			MANUAL		1
L =		0dB	OFF
					2

1Select the test tone type.

AUTO : The test tone switches between each speaker in regular intervals.

MANUAL : The test tone only comes from the selected speaker (displayed in blue).

OFF : Stops the test tone.

2 Adjust the Volume level of each speaker.

1Listen to the test tone and select the speaker you want to adjust.

•The selected speaker icon turns blue and the speaker name and level appear (at the bottom of the screen) to show that it can be adjusted.

2Listen to the test tone and adjust the volume level of the speaker (± 10 dB) using the TUNING/SKIP keys on the remote control.

TUNING/SKIP – : Lowers the volume TUNING/SKIP + : Raises the volume

• Adjust the subwoofer as you desire.

3Continue to the SP.DIST (speaker distance) screen.

Preparations

5Enter the speaker distance.

Enter the distance from your listening position to the front (left or right), center, and rear (left or right) speakers. If both front (or rear) speakers are not the same distance from the listening position, enter the distance to the closest speaker.

						1
SET UP
				MAIN
					3
	SP.SLCT	SP.LVL	SP.DIST	INLVL		2

SPEAKER

DISTANCE

	FRONT	1
	CENTER		3
	SURR.
10ft	3. 0m

Select the speaker.

The speaker name turns blue. An arrow icon appears to indicate the selected speaker.

Enter the speaker distance.

Use TUNING/SKIP on the remote control to select the appropriate distance.

The distance is adjustable from 0.0meters (0 feet) to 9.0meters (30 feet) in 0.3meter (1 foot) steps.

Continue to the IN LVL (input level) screen.

6Adjust the audio input level of the connected components.

The LEVEL INDICATOR lights during playback if the signal being input from an analog source is too large. If this occurs, use this screen to attenuate the input level for that source.

SET UP			MAIN
SP.SLCT	SP.LVL	SP.DIST	INLVL

INPUT LEVEL

SELECTOR: TUNER

LEVEL : 0dB

1Select the input.

1Use TUNING/SKIP on the remote control to select the desired input.

2 Move the pointer downward.

	2 Select an input level.
1	The input level is adjustable in 3 levels. Use TUNING/SKIP on the remote control to select the
	smallest level required to extinguish the LEVEL INDICATOR (normally, set to 0 dB).
2	0 dB ï –3 dB ï –6 dB
	• Input level adjustment is not possible when using the AUX.6CH INPUT or ADAPTOR jacks.

3 Press the SETUP key on the remote to turn off the on-screen display.

4Press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD remote control mode.

This completes the surround setup.