■Removing the hard rubber frame
1Engage the catch pins on the removal tool and remove the two locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
■Removing the Unit
1Refer to the section "Removing the hard rubber frame" and then remove the hard rubber frame.
2Remove the screw (M4⋅8) on the back panel.
3Insert the two removal tools deeply into the slots on each side, as shown.
Lock
Accessory2 Removal tool
Catch
Accessory2 Removal tool
Screw (M4X8) (commercially available)
2When the lower level is removed, remove the upper two locations.
4Lower the removal tool toward the bottom, and pull
out the unit halfway while pressing towards the inside.
| Be careful to avoid injury from the catch pins on the removal tool. |
The frame can be removed from the top side in the same manner. | 5 Pull the unit all the way out |
| |
| with your hands, being |
| careful not to drop it. |
— 27 —
