General features
English
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, the "ATT" indicator blinks.
•Each setting value is changed with the <Speaker Setting> (page 7).
First, select the speaker type with the Speaker setting.
•When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values.
Loudness
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the Loudness turns ON or OFF.
When it’s ON, "LOUD" indicator is ON.
System Q
You can recall the best sound setting preset for different types of the music.
1Select the source to set Press the [SRC] button.
2Select the Sound type Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting | Display |
Flat | "FLAT" |
Rock | "ROCK" |
Top 40 | "TOP40" |
Pops | "POPS" |
Jazz | "JAZZ" |
Easy | "EASY" |
Scan of Flat — Easy | "SCAN" |
Audio Control
1Select the source for adjustment Press the [SRC] button.
2Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3Select the Audio item for adjustment Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted switch as shown below.
4Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item | Display | Range |
Bass level | "BAS" | |
Middle level | "MID" | |
Treble level | "TRE" | |
Balance | "BAL" | L15 — R15 |
Fader | "FAD" | R15 — F15 |
5Exit Audio Control mode Press the [AUD] button.
— 6 —
