Kenwood Eject:, Playing Cassette Tapes, Listening to the other side:, Loading and Playing Cassettes:, Playing Cassettes Already Loaded:

Cassette player features

English

				SRC		OFF
		4 FM		PROG	SRC		¢
			PROG / PTY DISC		DAB	EJECT
					FM
ATT
LOUD B C NR SCAN B.S / RDM	REP	D.SCN MTL / M.RDM TI	DISP		AM
		VOL ADJ	NAME.S	MENU
				DISC	NF
				AUD		CLK
B.S	REP	MTL			AM
B.C NR			DISP
(B NR)

KRC-PS978R/878R

B/C NR indicator Tape counter display

IN indicator MTL indicator Tape side

KRC-778R/778RV

Tape side Tape counter display IN indicator

Playing Cassette TapesLoading and Playing Cassettes:

Press the ¡(EJECT) button to slide open the faceplate, showing the cassette (insertion) slot. Holding the cassette with the tape exposed to the right, insert it in the slot.

The faceplate will close, and the tape will start playing.

The IN indicator lights up when a cassette has been loaded.

Playing Cassettes Already Loaded:

Press the SRC button repeatedly until the tape mode is obtained. "TAPE" is displayed when the tape mode has been selected.

The tape will start playing.

Listening to the other side:

Press the PROG button.

Tape play switches to the other side.

Eject:

Press the ¡(EJECT) button to stop tape play. The faceplate will slide to eject the tape.

Press the ¡(EJECT) button to close the faceplate.

2CAUTION

When the faceplate has been slid open, it might interfere with the gear lever or something else. If this happens, pay attention to safety and move the gear lever or take an appropriate action, then operate the unit.

NOTE

•The sound will be temporarily muted whilst the faceplate is moving.

•The only buttons that will work during the eject state are the ¡(EJECT), SRC, TI and ATT buttons, as well as the volume control button.

•Remove a cassette from the unit when not listening to it for a whilst. If you leave it in the unit too long, the tape may stick to the tape head and cause the unit to malfunction.

MTL indicator B NR indicator

— 20 —