Menu settings

English

Mask Key

If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.

When using the unit for the first time:

In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal.

If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

3Press the FM button repeatedly until the "Mask key" appears in the display.

Press the AM button to search in the other direction.

4Hold down either the 4 or ¢ button for two seconds or more.

"TRANSMIT 1" will appear in the display, indicating the setting mode has been entered.

5Hold down the transmit button on the Mask key until the full transmit level indicator lights up in the display.

"TRANSMIT 2" will be displayed.

Transmission part

Transmit button

NOTE

• Keep the Mask Key close to the signal sensor when you

transmit the Mask Key’s signal.

•If the Mask Key’s signal does not be received correctly, the display will return to "TRANSMIT 1" . In this case, repeat the procedure in step 5.

6Hold down the transmit button on the Mask key again until the full transmit level indicator lights up in the display. "APPROVED" will appear in the display, with the Mask key function turning on.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, "TRANSMIT 1" will appear in the display, indicating the setting mode has been entered. Repeat steps 5 and 6 above, and transmit the signal. You can start operating the unit again when "APPROVED" appears in the display.

Selectable Illumination

You can switch the colour of the button illumination between green and red.

Display and setting:

"Color Green" : The colour of the illumination is green.

"Color Red" : The colour of the illumination is red.

Contrast Adjustment

This adjustment permits easy viewing of the display.

Display and setting:

"Contrast 0" – "Contrast 10"

NOTE

The initial setting value is "5" .

— 32 —