Function of the KRC-PS978R/KRC-878R

"HPF F" : Adjust the frequency of the High-pass filter for front output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz

NOTE

•You can separately set the high-pass filter for front and rear output, including preouts.

•The high-pass filter does not affect the non-fading preout (KRC-PS978R only).

•The high-pass filter works except during non-fading preout when switching to non-fading.(KRC-878R only)

•The factory default settings for front output and rear output are "Through" .

Function of the KRC-PS978R/KRC-878R

"HPF R" : Adjust the frequency of the High-pass filter for rear output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz

NOTE

•You can separately set the high-pass filter for front and rear output, including preouts.

•The high-pass filter does not affect the non-fading preout (KRC-PS978R only).

•The high-pass filter works except during non-fading preout when switching to non-fading.(KRC-878R only)

•The factory default settings for front output and rear output are "Through" .

Function of the KRC-PS978R/KRC-878R

"LPF" : Adjust the frequency of the Low-pass filter for Non- Fading output.

Setting values: 50 Hz / 80 Hz / 120 Hz / Through

NOTE

•This mode is available only when the non-fading output function is set to on.( page9)

•Not available during the Dual zone system is on.

Function of the KRC-PS978R/KRC-878R

"NF PHS" : Adjust the phase for Non-Fading output. Setting values: NOR (0°) / RVE (180°)

NOTE

•This mode is available only when the non-fading output function is set to on.( page9)

•Not available during the Dual zone system is on.

"V OFFSET" : Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level.

Setting values: - 8 – 0

Storing your sound settings:

Hold down a preset button (#1-6) for two seconds or more.

NOTE

•This setting can be made only when the Sound coordinate system is on.( page33)

•The settings you can preset are, bass centre frequency, bass level, bass quality factor, bass extension, treble centre frequency, and treble level.

Recalling your sound settings:

Press a preset button (#1-6) except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode.

NOTE

This mode is available only when Sound coordinate system is on. (page33)

— 13 —