Kenwood Menu System, Enter the menu mode, Ending the menu mode, Selecting function to set, Changing setting for currently displayed function

Menu settings

								Menu System
			4	38	SRC			You can set the defaults for additional functions in the menu
				FM				¢ mode.
								Make a setting for each function, referring to the following
						SRC	OFF	operations.
				PROG / PTY	DISC	DAB	EJECT	1	Enter the menu mode
						FM
									Hold down the MENU button for one second or more.
LOUD B C NR	SCAN B.S / RDM REP	D.SCN	MTL / M.RDM	TI DISP		AM			"MENU" is displayed when the menu mode is entered.
ATT
				VOL ADJ NAME.S MENU	DISC	NF	CLK		The function that you can adjust is indicated with the current
				AUD
									settings displayed.
				MENU				2	Selecting function to set
					AM				Press the FM button to search through the functions until you
KRC-PS978R/878R									see the one you want to adjust in the display.
									Press the AM button to search through the functions
	AUTO indicator								backward.
									Example: If you want to switch the setting of the touch sensor
									tone function from on to off, first search through the
									functions until you see "Beep ON" in the display.
								3	Changing setting for currently displayed function
NEWS indicator									Press either the 4 or ¢ button.
			™ indicator						The setting will change for each function.
									Example: The setting of the touch sensor tone will switch from
KRC-778R/778RV									on to off, and "Beep OFF" is displayed.
				AUTO indicator
								4	Ending the menu mode
									Press the MENU button.
								NOTE
								Make sure to end the menu mode when finished.
								If you fail to end the menu mode, several functions may not
	NEWS indicator			™ indicator				operate properly, including the Traffic Information function and
								the Alarm function.

— 29 —