Kenwood Setting values: ON / OFF, Setting values: 1.00 / 1.25 / 1.50, This mode is available only when the, •Not available during the Dual zone system is on

General features

English

"Bas F/Bass F" : Adjust the centre frequency of the bass. Setting values: 60 / 70 / 80 / 100 (Only when the bass quality factor is set to 1.00, 1.25 or 1.50) / 150 (Only when the bass quality factor is set to 2.00) Hz

NOTE

This mode is available only when the Sound coordinate system is on. (page33)

"Bas/Bass " : Adjust the bass level. Setting values: - 8 – + 8

"Bas Q/Bass Q" : Adjust the Bass quality factor. Setting values: 1.00 / 1.25 / 1.50 / 2.00

NOTE

This mode is available only when the Sound coordinate system is on. (page33)

"Bas EXT/Bass EXT" : Switch the Bass Extend mode on/off. Setting values: ON / OFF

(When the bass extend mode is set to on, low frequency response is extended by 20%.)

NOTE

This mode is available only when the Sound coordinate system is on. (page33)

"Tre F" : Adjust the centre frequency of the treble. Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz

NOTE

This mode is available only when the Sound coordinate system is on. ( page33)."Tre/Trble" : Adjust the treble level. Setting values: - 8 – + 8

"Balance" : Adjust the balance level. Setting values: Left 15 – Right 15

"Fader" : Adjust the fader level. Setting values: Front 15 – Rear 15

Function of the KRC-PS978R/KRC-878R

"NF LVL" : Adjust the Non-fading output level. Setting values: - 15 – + 15

NOTE

•This mode is available only when the non-fading output function is set to on.( page9).

•Not available during the Dual zone system is on.

— 12 —