Kenwood Removing the Unit, ■ Removing the Unit, ■ Removing the hard rubber frame

Removing the Unit■ Removing the hard rubber frame

English	Insert the removal tool into the indentations in the hard rubber
	frame, and pull it gently until the lock is released.

Accessory4

Removal tool

■ Removing the Unit

1 Make the faceplate control panel appear.

NOTE

When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove the unit.

2Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

3Remove the screw (M4⋅8) on the back panel.

4Insert the removal tool deeply, as illustrated, with the L on the left and the R on the right.

Screw (M4X8) (commercially available)

	L	Accessory2
		Removal tool
5	Push upward the both
	tools, as shown, and pull
	the unit toward you until it
	is halfway out. The unit
	may drop if you pull it out	L
	completely.
6	Pull the unit all the way out
	with your hands, being
	careful not to drop it.
		L

— 42 —