Connecting the speakers

12

1 Strip coating.2 Loosen.

 

 

 

 

3 Insert. 4 Secure.

Preparations

1 Strip coating.

2 Push the lever.

 

3 Insert the cord.4 Return the lever.
Front Speakers A

Right Left

CenterSpeaker

FRONT SPEAKERS

CENTER SPEAKER

RED (8 – 16Ω ) BLUE

(8 – 16Ω )GREEN

+

–

Setting up the system

Connection of banana plugs (For U.S.A. and Canada)
1 Secure.2 Insert.

•Sound will not be heard if the speaker terminal is not fully secured.

•Never short circuit the + and – speaker cords.

•If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatu- ral with ambiguous acoustic imaging. Be sure to connect the speak- ers correctly.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

PRE OUT connections

This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below.

CENTER

SUB

Power amplifierSurroundSpeakers

FRONT WOOFER SURROUND

SUB WOOFER PRE OUT

Power amplifier Center Speaker

SUB

WOOFER

Use the FRONT SPEAKERS B terminals if you want to connect a second front speaker system.

Powered subwoofer

FRONT SPEAKERS (8 – 16Ω )

+ – – +

(8 – 16Ω )

ORANGE SURROUND SPEAKERS GRAY

Surround

Speakers

RightLeft

(Be sure to connect both surround speakers)

Subwoofer

Power amplifier

Front

Speakers

Power amplifier

•Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.

•To use the PRE OUT jacks, press only the SPEAKERS A key to the on position.