Caution : Read this page carefully to ensure safe operation.

For other countries (KRF-V8030D)28 AUDIO sectionEffective power output during STEREO operation

1kHz,10% T.H.D.,at 8 Ω ...........................................

140 W + 140 W

Rated power output during STEREO operation

100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic distortion.(FTC)

Effective power output during SURROUND operation

FRONT (1kHz, 10% T.H.D. at 8 Ω,one channel driven)

..............................................................................

140 W + 140 W

CENTER (1kHz, 10% T.H.D. at 8 Ω, one channel driven)

.............................................................................................

140 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω, one channel driven)

..............................................................................

140 W + 140 W

Total harmonic distortion .........................

0.055% (1 kHz, 50W, 8 Ω)

Frequency response

 

 

CD .............................................

10 Hz ~ 53 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

 

 

PHONO (MM) ........................................................................

75 dB

CD .........................................................................................

91 dB

Input sensitivity / .........................................................impedance

2.5 mV / 27 kΩ

PHONO (MM)

 

CD .........................................................................

200 mV / 47 kΩ

Output level / impedance..............................................................

200 mV / 1 kΩ

TAPE REC

 

PRE OUT (SUBWOOFER) .........................................

2 V / 2.2 kΩ

Tone control

 

 

BASS (For Australia and U.S-Military)....... ±10 dB (at 100 Hz)

BASS (Other countries) ................................

±10 dB (at 60 Hz)

TREBLE ..........................................................

±10 dB (at 10 kHz)

DIGITAL AUDIO section

Sampling frequency

...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz

Input level / impedance / wave length

Optical .............................

(-15 dBm ~ -21 dBm), 660 nm ±30nm

Coaxial .................................................................

0.5 Vp-p / 75 Ω

Other

Specifications

VIDEO section

VIDEO inputs / outputs

 

Vp-p / 75 Ω

VIDEO

(composite) ...........................................

1

S VIDEO

(luminance signal) ................................

1

Vp-p / 75 Ω

 

(chrominance signal) ....................

0.286

Vp-p / 75 Ω

FM tuner section

Tuning frequency range ...................................

87.5 MHz ~ 108 MHz

Usable sensitivity (MONO)

................ 1.6 µV (75

Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)

50dB quieting................................................sensitivity

31.6 µV (75 Ω)/ 41.2 dBf

STEREO

Total harmonic distortion (1 kHz)

MONO ............................................................

0.6% (65 dBf input)

STEREO ........................................................

0.7% (65 dBf input)

Signal to noise ratio (1 kHz, 75 kHz DEV.)

MONO ..........................................................

75 dB (65 dBf input)

STEREO ......................................................

68 dB (65 dBf input)

Stereo separation (1 kHz)

.......................................................... 38 dB

Selectivity (±400 kHz) .................................................................

50 dB

Frequency response .................

(30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range

 

9 kHz step ...................................................531 kHz ~ 1,602 kHz

10 kHz step .................................................

530 kHz ~ 1,610 kHz

Usable sensitivity (30% mod., S/N 20 dB)

 

........................................................................

16 µV / (600 µV/m)

Signal to noise ratio (30% mod. 1 mV input) ...........................

50 dB

GENERAL

Power consumption

.................................................................. 250 W

AC outlet

 

SWITCHED .......................................................

(total 90 W max.)

Dimensions ......................................................................

W : 440 mm

 

H : 143 mm

 

D : 400 mm

Weight (Net) ...............................................................................

7,4 kg

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).