Preparing for automatic operations
34(MACRO play)
The macro play function allows you to set the remote to control several components in succession. After completing this setup, you can perform a series of operations automatically. Enter the setup codes for the components you want to control beforehand.
MACRO 
MUSIC, MOVIE,
TV
+ +
– –
During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, the remote control unit exits from the MACRO play mode.
1Make a plan of the macro play you want to Setup.
The order of the operations may be fairly complex and you may not be remember all of the necessary commands during the setup procedure.
Use the space provided below to write down the operations in the order you are going to enter them.
• Up to 20 steps can be memorized for each macro.
1 |
| ! |
|
|
|
|
|
2 |
| @ |
|
|
|
|
|
3 |
| # |
|
|
|
|
|
4 |
| $ |
|
|
|
|
|
5 |
| % |
|
|
|
|
|
6 |
| ^ |
|
|
|
|
|
7 |
| & |
|
|
|
|
|
8 |
| * |
|
|
|
|
|
9 |
| ( |
|
|
|
|
|
0 |
| ) |
|
|
|
|
|
•The example below shows the plan for step 4 (which occupies a total of 6 steps) :
1 | TV + AV. POWER | 2 steps |
2 | FUNCTION SHIFT + 3 | 2 steps |
3 | MOVIE | 1 steps |
4 | AV. POWER | 1 steps |
|
| |
Total | 6 steps | |
•If you attempt to store more than 20 steps, “Full” appears and exit the macro programming mode.
•Enter channel numbers (for the monitor TV, etc.) exactly as you would using the original remote.
•When you select the input by using the MUSIC, MOVIE, or TV key, it is count 1 step even if you press these keys several times.
Remote | 2Press and hold the MACRO key for more than 2 seconds. | ||
• “MACRO MEMORY” appears in the display. | |||
Control | |||
Select | MACRO | ||
| MACRO | MEMORY | |
Menu
Getting the most from your remote control
3Press the MUSIC, MOVIE, or TV key to select the macro location. (MACRO1, 2, and 3 respectively)
• You can store up to 3 different macros, one at each key:
MOVIE ="MACRO ",1 MUSIC ="MACRO ",2 TV ="MACRO "3
•The light flashes once when you select the macro location.
•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro program mode.
MACRO1
Select MACRO
Menu
When MOVIE is pressed
4Press the keys to be operated in order.
EXAMPLE:
This example shows you how to create a macro that; turns on the TV, sets the TV to the appropriate input, selects the receiver's input selector to LD, and turns on the LD player. All you have to do is insert the laser disc!
1Press the TV key, then press the AV.POWER 
key to turn on the TV.
2Press the F. SHIFT key, then press the "3" (INPUT SEL.) key to set the TV to the appropriate video input.
3Press the MOVIE key to select the LD player registered at VIDEO 2.
4Press the AV.POWER 
key to turn on the LD player.
•Make sure you start the next operation within 8 seconds of complet- ing the previous one. If more than 8 seconds elapses between any two steps, exit the macro programming mode.
•In order to allow verification of the remote control mode, the name of the selected input appears in the receiver's display when the MUSIC, MOVIE, or TV key is pressed. When the MUSIC or MOVIE key is pressed the receiver's input also changes.
5Press the MACRO key so that the light flashes twice.
•The macro is stored at the locations specified in step 3. If another macro was previously stored at the same location, it is erased.
Repeat steps 1 through 5 to program up to 3 macros.
This completes the macro programming procedure.