Manuals / Brands / Home Audio / Stereo Receiver / Kenwood / Home Audio / Stereo Receiver

Kenwood KRF-V8030D, VR-409 To delete the setup code, Executing an automatic operation, MUSIC, ", TV, MUSIC, MOVIE, MUSIC, ", MOVIE, Press the, 6Press [Enter], 1Press the MACRO key

1 42

Download 42 pages, 1.09 Mb

			Getting the most from your remote control
	Executing an automatic operation		To delete the setup code
				35
	MACRO	MUSIC, MOVIE,	Display operation 1	5/°
			Display operation 2
		TV

	+	+	+	+
	–	–
			–	–

During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.

During opration, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.

1Press the MACRO key.

• “MACRO EXE” appears in the display.

MACRO EXE

Select MACRO

Menu

2Press the MUSIC, MOVIE, or TV key to execute the corresponding macro play.

• "MACRO EXE" appears in the display and the pre-programmed macro is performed:

MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"

•Some devices take up to 1 second to power on. The macro function has an automatic delay after any power function output.

•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro program mode.

MACRO1 EXE

Select MACRO

Menu

When MUSIC is pressed

1Press the display operation 1 key repeatedly until “Menu” appears in the display.

Video1:

VCR

Menu

2Press the [Menu] key repeatedly until “01.IR” appears in the display.

•The setup display appears.

>01.IR

>02.Surround Home Enter

3Press the 5/°keys to select “01.IR,” then press the [Enter] key.

•The input selecting display appears.

>03.Video1 >04.Video2 Back Enter

4Press the 5/°keys to select the input that you want to delete, then press the [Enter] key.

5Press the 5/°keys to select “Delete.”

>13:Delete >01:CD Back Enter

6Press [Enter].

•The setup code is deleted.

Remote Control

Contents

Preparation This instruction manual is used to describe multiple models listed above About the supplied remote control (RC-R0809) Operations Other Safety precautions Unpacking Contents How to use this manual Special features Display For U.S.A and Canada 1 POWER key$ (Except for U.S.A. and Canada) Use to turn the main power ON/OFF Remote control unit Connecting audio components Connecting video components Digital connections Connecting to the AUX IN jacks Connecting the antennas Connecting the system control Connecting the speakers Preparing the remote control Speaker settings 3Adjust the volume levels for the speakers Input level adjustment (analog sources only) Lch = Cch = Rch = RS = LS = SW = Lch 2Press the SET UP or display operation 2 [Next] key 4Input the distance to the speakers Preparing for playback Listening to a source component Adjusting the sound Recording audio (analog sources) Recording video Recording audio (digital sources) Tuning radio stations Presetting radio stations manually Receiving preset stations Receiving preset stations in order (P.CALL) Surround modes Dolby 3 Stereo Multi channel music (SRS Circle Surround) Ambience effects DSP mode What's DSP Surround Play DVD 6-channelplayback Convenient functions Midnight mode (Dolby Digital (AC-3)mode only) 1Press the SOUND key several times until "NIGHT" is displayed 2Use the MULTI CONTROL knob or the 5/°keys to select the on or off setting Display dimmer adjustment Circle surround mode Resetting the Microcomputer For U.S.A. and Canada If the microcomputer may malfunction (unit cannot be operated or shows an erroneous display) if the power cord is unplugged Unplug the power cord from the wall outlet, then plug it For U.S.A and Canada (VR-409) AUDIO section Rated power output during STEREO operation Effective power output during SURROUND operation FRONT (20-20kHz,0.7% T.H.D. at 8 Ω, one channel driven) For other countries (KRF-V8030D) 28 AUDIO section Effective power output during STEREO operation 1kHz,10% T.H.D.,at 140 W + 140 W 1Display operation 1 key 2Display operation 2 key 3Display 45/°keys 5MOVIE, MUSIC, and TV keys Step How to use the display operation keys Remote 5Press the display operation 2 [Enter] key Operating other components Changing (confirming) the operation mode Preparing for automatic operations 34(MACRO play) 2Press and hold the MACRO key for more than 2 seconds Executing an automatic operation To delete the setup code 1Press the MACRO key 2Press the MUSIC, MOVIE, or TV key to execute the corresponding macro play ", MOVIE Storing the remote control cord of the other 36components Restoring the original factory settings Displaying the CD TEXT data When you operate by using the keys 1Press the MUSIC, MOVIE, or TV key to select the component you want to control 2Press the keys corresponding to the operations you desire F. SHIFT When you operate by using the display TV operations DSS receiver operations 01: Exit 02-06: Extend1-5 Cable tuner operations 01: A - B - C Remote control unit The battery indicator flashes during opera tion Subwoofer volume cannot be adjusted Certain inputs cannot be selected using the