32

5Press the display operation 2 [Enter] key.

• The source selecting display appears.

• When you select “Phono” in step 4, go to step 0.

>05.VCR >06.Cable Back Enter

6Press the 5/°keys to select the source you want to register.

•Each time you press the 5/° key, the input changes as follows:

01: CD

02:Tape

03:MD

04:CD-R

05:VCR

06:Cable

07:Satellit

08:TV

09:LD

10:DVD

11:DSS (U.S.A only)

12:No type

13: Delete

• Select “No type” when the desired source does not appear in the display.

• The selected input does not appears when you select “Delete.”

7Press the display operation 2 [Enter] key.

• The maker selecting display appears.

For Europe and U.K

For other countries

>Kenwood

>Kenwood

>Aiwa

>Admidral

Back Enter

Back Enter

8Press the 5/°keys to select the maker you want to register.

•Press the 5/° keys until the desired maker appears in the display. When the desired maker does not appear, select “Nothing.”

9Press the display operation 2 [Enter] key.

• The setup code selecting display appears.

>01:0056

>02:Nothing Back Enter

0Press the 5/°keys to select the setup code.

!Press the AV.POWER key, and check to see that the component you want to control turns on.

If the component does not react, and there is more than one setup code, enter another setup code and try again.

Remote

• ‹or TUNING key can also be used instead of the AV. POWER

 

 

will turn it off.

 

 

key.

 

Control

• If the component is already on, pressing the AV. POWER

 

 

key

 

 

 

 

Getting the most from your remote control

@Press the display operation 2 [Enter] key.

• The display returns to the setup display.

>01.IR

>02.Surround Home Enter

Repeat steps 3 to @ to register additional components until all components have been registered.

To returns to the initial display, press [Back] repeatedly until “Menu” appears in the display.

Video1:

VCR

Menu

•Once registered, the display on the receiver shows the component type instead of the default input name.

Example: if you register a VCR at the VIDEO 1 jacks, “Video1” and "VCR" appear in the display.

•Any VIDEO or TV (TV1, TV2, CABLE) inputs that have not been programmed with a setup code or Non-IR code are deleted from the cyclic list.

When you mistake

Press the display operation 1 [Back] key repeatedly until the display you want to re-operate appears.

Note

Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.)