RecordingRecording music in M-REC MODE

DIMMER

INPUT SELECTOR

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them by

one-touch operation.

19

 

Tuning radio stations

 

 

 

 

MULTI CONTROL INPUT SELECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Use the input selector to select the source (CD, DVD,VIDEO2, or VIDEO3) you want to record.

2Set the cassette deck to record.3Play the source to be recorded.4Press and hold the DIMMER key for more than 2 seconds to select the M-REC MODE.

The mode changes every 2 seconds as shown below.

1REC MODE off : The digital input record mode is switched off.

2A-REC MODE : The digital input signals (DTS,

Dolby Digital or PCM) are identified automatically and converted into stereo signals that are ready for recording.

3M-REC MODE : The input signal type at the moment this mode is selected is held throughout this mode.

FM

DIGITAL

 

AM PRO LOGIC S.DIRECT

 

MHz 3 STEREO MONITOR

 

kHz DOWN MIX

DSP

 

 

 

 

 

FM AUTO SOUND DIGITAL

AUTO

AM PRO LOGIC S.DIRECT

MEMO

MHz 3 STEREO

MONITOR

ST.

kHz DOWN MIX

DSP

TUNED

 

 

 

5Play the source from the beginning and start recording.

If the audio reproduction stops in the middle due to change in the input signals, etc., press the DIMMER key.

BAND AUTO

MUSIC

TUNING2/3

BAND

AUTO

1Use the INPUT SELECTOR knob or MUSIC key to select the tuner.2Use the BAND key to select the desired broadcast band.
Each press switches the band

"AM" or "FM" indicator

 

as follows:

 

 

 

FM

DIGITAL

AUTO

 

 

 

1 FM

AM PRO LOGIC S.DIRECT

 

 

 

 

MHz 3 STEREO MONITOR

 

 

 

 

2 AM

kHz DOWN MIX

DSP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3Use the AUTO key to select the desired tuning method.Each press switches the tuning method as follows:

1 AUTO lit (auto tuning)

"AUTO" indicator lights.

2AUTO not lit (manual tuning)

FM

DIGITAL AUTO

AM PRO LOGIC S.DIRECT

MHz 3 STEREO MONITOR

kHz DOWN MIX

DSP

Operations

Normally, set to "AUTO" (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.)

4Use the MULTI CONTROL knob (2/3key) to select the station.

Frequency

Lights when a broadcast is

display

being received in stereo.

 

 

 

 

 

 

 

 

 

 

FM

DIGITAL

 

AUTO

 

 

 

 

AM PRO LOGIC S.DIRECT

 

 

 

 

 

 

MHz 3 STEREO MONITOR

 

ST.

 

 

 

 

kHz DOWN MIX

DSP

TUNED

 

 

 

 

 

 

 

 

 

 

"TUNED" is displayed when a station is received

Auto tuning :

The next station is tuned automatically.

Manual tuning :

Turn the knob (press the key) to select the

 

desired station.