Receiver/Tuner
I’m getting a lot of static/interference.
•Check whether the receiver or antenna is too close to a TV or other electrical appliance.
•Adjust the antenna for best reception.
•If you live in an area with weak FM signals, consider a rooftop FM antenna (available at any home electronics store).
When I press a button to tune to a preset station, the receiver does not respond.
Check whether:
•The receiver has been unplugged for more than three days. If it has, your settings were cleared from the receiver’s memory. See “My re- ceiver won’t turn on and the STANDBY indicator is flashing” on page 104 of this manual.
•The Tuner input is selected. See “Tuner” on page 57 of this manual.
Macro is not running as I programmed.
•Because PowerTouch can only transmit one command at a time, stag- ger the timings of the various macro settings so that the commands are given at different times.
•On or Off command for audio devices may not work correctly if they are not Kenwood components connected via system control cables.
•Depending on the video signals of the connected video devices, TV power sensing may not work correctly.
Troubleshooting
107