How Do I Adjust the Surround Modes?
3.When you select Dolby PL II: Music, you can change the settings of Panorama mode, Dimension and Center Width.
1)Panorama mode setting: Touch the 
button to switch the parameter on and off alternately.
2)Dimension setting: Touch the 
button on the left of
to switch the setting to
button on the right of 
to switch it to
3)Center Width setting: Touch the 
button on the left of 
to decrease the expansion to the left and right. Touch
the 
button on the right of 
to increase it.
Description of Dolby Pro Logic II: Music Mode
Panorama mode : Expands the image of
Dimension : This controls the balance between the Front and Rear in 3 steps on the front and 3 steps on the rear. Set this parameter to one of the Front steps if the surround effect is too strong, or to one of the Back steps if it is too weak.
Center Width : The center channel signal can be divided and distributed to the Front L/R channels.
The adjustment for distributing the center channel signal to the front channels can be applied in eight steps from 0 to 7.
Use this adjustment when the center image seems to be too strong.
The Center Width parameter cannot be adjusted when
Center speaker is set to Off or No.
PowerTouch Using
29