How Do I Operate Devices?
You have to assign disc and track titles to the discs in your CD player before you can transfer them to PowerTouch. See your CD player’s instruction manual for more information about assigning disc and track titles.
To read the loaded disc titles and store them in PowerTouch:
1.Touch 
(HOME1) on the Quick Access menu.
2.Touch 
(CD1).
3.Touch 
. This accesses the disc mode commands:
4.If you haven’t already done so on the CD changer, touch 
. This reads all of the disc and track title information into the CD changer’s memory.
5.Set PowerTouch down so that its IR transmitter window is aiming at
the CD changer’s IR transmitter window. Select 
. Do not move PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you have loaded. When the IR light on the receiver goes out, CD changer is done sending the information to PowerTouch, and you may move PowerTouch again. PowerTouch’s memory now contains the disc titles of every CD in the changer with title information.
6.Touch 
to return to the CD controls.
PowerTouch Using
47