Using PowerTouch
How Do I Operate Devices?
Controlling a device without altering the receiver's input selection (Operations using the SHIFT button):
The transmission of operation signals from PowerTouch to the receiver can be disabled with the HOME1 or HOME2 menu. This makes it pos- sible, for example, to turn the VCR ON while listening to a CD.
Procedure:
1.Touch 
(HOME1) or 
(HOME2) in the Quick Access menu to display the HOME1 or HOME2 menu:
2.Touch 
button.
3.Touch the desired operation button within 3 seconds after above.
By touching the 
button and executing an operation, any de- vice can be controlled without sending the command signal to the receiver.
The above operation is not available with devices connected using the Kenwood system control cable.
36