Troubleshooting

Receiver/Tuner

2. Select .

3.Touch . Every time you select the button the volume will cycle between 0dB, -3dB, -6dB and back up to 0dB.

4.While the source component is playing, reduce the Input Level to - 3dB. If the CLIP indicator still flashes frequently or remains lit for 1 second or longer, reduce the Input Level again to -6dB.

5.Touch to return to the Setup menu.

I can’t access any RDS (Radio Data System) functions (for U.K. only)

•Confirm that the radio station is broadcasting RDS.

•Make sure you use the Auto Memory function to store RDS stations in memory. See “Storing RDS Stations Automatically” on page 41 of the Connections and Setup Guide.

Ican’t receive a radio station. Check that:

•The appropriate antenna is connected. See Chapter One of the Con- nections and Setup Guide.

•The broadcast band is correct. See “Tuner” on page 57 of this manual.

•The tuner is set to the correct frequency. See “Tuner” on page 57 of this manual.

106