Chapter Three: Using PowerTouch in Multiple Zones
The KRF-X9995D offers dual-zone output and control, which enables you to use a single receiver to control devices and speakers for 2 zones. Due to its advanced features and controls, you can listen to music in one zone while a movie plays in the other!
Depending on your tastes and budget, you can set up one of the following “sound scenarios” to make full use of the KRF-X9995D’s capabilities:
No additional amplifier for Zone B: You can use the KRF-X9995D’s Speaker B output for Zone B. This allows you to listen to full surround sound in Zone A only, or in stereo in Zone A when Zone B is active. The sound in Zone B will always be in stereo.
Stereo amplifier for Zone B: You use an additional stereo amplifier for Zone B (connected to the KRF-X9995D’s Second Zone Preouts). This allows you to hear full surround sound in Zone A even if you are also listening in Zone B. The sound in Zone B will always be in stereo.
This chapter covers only multiple-zone operation of the KRF-X9995D. See Chapter Two for general operating instructions.
