Storing Data in PM Channels
1Confirm that the following conditions have been satisfied:
•The transceiver is in receive mode.
•Scan is not being used.
•Microphone Control is OFF.
2Configure the transceiver with your desired settings.
3Press [F], [PM].
•PM channel numbers 1 to 5 appear and blink at the bottom of the display.
4Enter a channel number ([1] to [5]) corresponding to your desired PM channel.
•The settings are stored in the PM channel.
Recalling PM Channels
1Press [PM].
•PM channel numbers 1 to 5 and OFF appear on the bottom of the display.
2Enter a channel number ([1] to [5]) corresponding to your desired PM channel.
•The settings stored in the PM channel are recalled.
•The selected channel number appears on the display.
•When selecting [OFF], the PM channels turn off.
40