Kenwood TM-V71A, TM-V71E PROGRAM SCAN, [F], [MR], [LOW], Tuning, Tuning, Tuning, Tuning, Tuning, Tuning, 2 Press [VFO], nSetting Scan Limits

3Rotate the Tuning control to select a group to link.

4Press the Tuning control to set the group and move the cursor to the right.

•Press [REV] () to move the cursor back or [LOW] () to move the cursor to the right.

5Repeat steps 3 and 4 to link additional groups together.

6When you have entered your desired groups, press [LOW] () to move the cursor to the right, then press the Tuning control to complete the entry and exit Menu mode.

•If you have entered the maximum of 6 groups, simply press the Tuning control to complete the entry and exit Menu mode.

PROGRAM SCAN

Program Scan is identical to VFO Scan except that you select a frequency range for the scan.

nSetting Scan Limits

You can store up to 10 scan ranges in Memory channels L0/U0 to L9/U9.

1 Select your desired band.

2 Press [VFO].

3 Rotate the Tuning control to select your desired frequency for the lower limit.

4Press [F].

•A memory channel number appears and blinks.

5Rotate the Tuning control to select a channel from L0 to L9.

6Press [MR] to set the channel number.

•The lower limit is stored in the channel.

7Rotate the Tuning control to select your desired frequency for the lower limit.

46