MHz SCAN
MHz Scan monitors a 1 MHz segment of the band, using the current frequency step size. The current 1 MHz digit determines the limits of the scan. For example, if the current frequency is 145.400 MHz, then the scan range would be from 145.000 MHz to 145.995 MHz (the exact upper limit depends on the current frequency step size).
1Select your desired band.
2Press [VFO].
3Rotate the Tuning control to select a frequency within your desired 1 MHz range.
4Press and hold the Tuning control for 1 second to start scanning.
•Scan starts at the current frequency.
•The 1 MHz decimal blinks while scanning is in progress.
•To reverse the scan direction, turn the Tuning control clockwise (upward scan) or counterclockwise (downward scan). You can also press microphone [UP]/ [DWN].
5To quit MHz Scan, press the Tuning control again.
CALL SCAN
Use Call Scan to monitor both the Call channel and either the currently selected VFO frequency or the currently selected Memory channel.
1Select your desired VFO frequency or Memory channel.
2Press [CALL] (1s) to start Call Scan.
•The 1 MHz decimal blinks while scanning is in progress.
•When scanning a Memory channel, the Call channel on the same band as the selected Memory channel is used for scan.
3To quit Call Scan, press [CALL] again.
Note: The Memory channel selected is scanned even if it has been locked out of scan.
48