1Enter Menu mode and access Menu 518 (DAT.SPD) {page 20}.

2Set the data speed to 1200 or 9600 bps.

PC Port Speed

You can adjust the speed at which the computer and transceiver exchange information, when the transceiver is connected to your computer.

1Enter Menu mode and access Menu 519 (PC.SPD) {page 20}.

2Set the PC port speed to 9600, 19200, 38400, or 57600 bps.

• Turning the power ON/OFF will change the port speed setting.

SQC Output Setting

You can set the condition for which the SQC output terminal becomes active.

1Enter Menu mode and access Menu 520 (SQC.SRC) {page 20}.

2Set the SQC output activation method to one of the following:

•OFF: SQC output remains inactive.

•BUSY: When a signal is received on the data band, the SQC output becomes active.

•SQL: While CTCSS/DCS is ON and a matching signal is received, the SQC output becomes active. While CTCSS/DCS is OFF, the SQC output becomes active when a busy signal is received.

•TX: While transmitting, the SQC output becomes active.

•BUSY.TX: When the conditions of BUSY and TX (above) are met, the SQC output becomes active.

•SQL.TX: When the conditions of SQL and TX (above) are met, the SQC output becomes active.

Note: The activation type (logic) can be changed using the MCP-2A software.

84