Power On Password

If power on password is activated, you cannot operate the transceiver without first entering your password, after turning the transceiver power ON. Your password can be changed using the MCP-2A software, and can contain up to 6 digits.

1Enter Menu mode and access Menu 998 (PASSWD) {page 20}.

2Set the power on password to ON or OFF.

• When set to ON, “PASSWD” appears on the display.

3Enter your password.

[F]: 1

[TONE]: 2

[REV]: 3

[LOW]: 4

[PF1]: 5

4After entering up to 6 digits, press the Tuning control to set the password.

Note: Even with Menu 998 turned ON, the power on password function will not be activated unless you first program a password using the MCP-2A software.

74