External Speaker Configuration
This transceiver has two speaker jacks for external speakers, as well as an internal speaker. You can enjoy a variety of speaker configurations by using one or two external speakers. Received signals on bands A and B are output depending on how you want the internal and/or external speakers to function.
1Enter Menu mode and access Menu 002 (EXT.SP) {page 20}.
2Set the speaker mode to MODE 1 or MODE 2.
• Refer to the table below for configurations based on the mode selected.
| Speaker |
| Band Output |
| |
Mode | Internal |
|
| ||
Setup | External SP1 | External SP2 | |||
| Speaker | ||||
|
|
|
| ||
| None | A, B | – | – | |
|
|
|
|
| |
MODE 1 | SP1 only | x | A, B | – | |
|
|
|
| ||
SP2 only | A | – | B | ||
| |||||
|
|
|
|
| |
| SP1, SP2 | x | A | B | |
|
|
|
|
| |
| None | A, B | – | – | |
|
|
|
|
| |
MODE 2 | SP1 only | x | A, B | – | |
|
|
|
| ||
SP2 only | B | – | A | ||
| |||||
|
|
|
|
| |
| SP1, SP2 | x | B | A | |
|
|
|
|
|
Masking a Band
If you have no plans to use band A or B, you can hide the frequency display on the unused band. This saves power consumption and makes it simpler to read the information you need.
1Turn the transceiver power OFF.
2Press the left or right [BAND SEL] + Power ON.
• The band mask display appears.
3Rotate the Tuning control to select the band you want to hide (or return to normal).
71