Repeater Hold

If necessary, you can set the transceiver to remain in the transmit mode for 500 ms after a signal drops.

1Enter Menu mode and access Menu 404 (RPT.HLD) {page 20}.

2Set the Repeater Hold function to ON or OFF.

Repeater ID

If necessary, you can set the transceiver to transmit your call sign every 10 minutes.

1Enter Menu mode and access Menu 406 (ID.TX) {page 20}.

2Set the ID Trasmit function to OFF, MORSE, or VOICE.

•To use VOICE transmission, you must have the VGS-1 option installed. When using the VGS-1 option, the ID Transmit function will use VGS channel 3 as the call sign {page 78}.

•When selecting MORSE, the call sign stored in Menu 405 {see below} will be transmitted at 20 wpm (words per minute).

nEntering your Repeater ID

1 Enter Menu mode and access Menu 405 (RPT.ID) {page 20}.

2 Enter your call sign {page 24}.

82