Kenwood TS-2000, TS-2000X, TS-B2000 manual 131

21 APPENDIX

FA	Reads and sets the VFO A frequency.											Parameters:
												P1
												Specify the frequency in Hz (11-digit).
	1	2	3	4	5	6		7	8	9	10
												For example, 00014195000 for 14.195 MHz. The blank digits
	F	A
			P1	P1	P1	P1		P1	P1	P1	P1	must be 0.
Set
	11	12	13	14	15	16		17	18	19	20
	P1	P1	P1	;
	1	2	3	4	5	6		7	8	9	10
Read	F	A	;
	1	2	3	4	5	6		7	8	9	10
	F	A	P1	P1	P1	P1	P1		P1	P1	P1
Answer
	11	12	13	14	15	16		17	18	19	20
	P1	P1	P1	;
FB	Reads and sets the VFO B frequency.											Parameters:
												P1
												Specify the frequency in Hz (11-digit).
	1	2	3	4	5	6		7	8	9	10
												For example, 00014195000 for 14.195 MHz. The blank digits
	F	B
			P1	P1	P1	P1		P1	P1	P1	P1	must be 0.
Set
	11	12	13	14	15	16		17	18	19	20
	P1	P1	P1	;
	1	2	3	4	5	6		7	8	9	10
Read	F	B	;
	1	2	3	4	5	6		7	8	9	10
	F	B	P1	P1	P1	P1	P1		P1	P1	P1
Answer
	11	12	13	14	15	16		17	18	19	20
	P1	P1	P1	;
FC	Reads and sets the sub-receiver’s VFO frequency.											Parameters:
												P1
												Specify the frequency in Hz (11-digit).
	1	2	3	4	5	6		7	8	9	10
												For example, 00144195000 for 144.195 MHz. The blank
	F	C
			P1	P1	P1	P1		P1	P1	P1	P1	digits must be 0. If the invalid frequency step size is used in
Set												the P1 parameter, the transceiver automatically sets the
	11	12	13	14	15	16		17	18	19	20
												nearest frequency.
	P1	P1	P1	;
	1	2	3	4	5	6		7	8	9	10
Read	F	C	;
	1	2	3	4	5	6		7	8	9	10
	F	C	P1	P1	P1	P1	P1		P1	P1	P1
Answer
	11	12	13	14	15	16		17	18	19	20
	P1	P1	P1	;
FD	Reads the filter display dot pattern.											Parameters:
												P1
												00000000 ~ FFFFFFFD (32-bit)
	1	2	3	4	5	6		7	8	9	10
												The filter width display has 30 dots.
Set
												MSB represents a dot on the left. The last 2 bits are
												unused.
	1	2	3	4	5	6		7	8	9	10
												These bits are set to 0.
Read	F	D	;
	1	2	3	4	5	6		7	8	9	10
	F	D	P1	P1	P1	P1	P1		P1	P1	P1
Answer
	11	12	13	14	15	16		17	18	19	20
	;

123