Kenwood TS-2000, TS-2000X, TS-B2000 133

21 APPENDIX

ID	Reads the transceiver ID number.												Parameters:
ID													P1
													019: TS-2000
	1	2	3	4	5		6	7		8	9	10	019: TS-2000
	1	2	3	4	5		6	7		8	9	10

	1	2	3	4	5		6	7		8	9	10
Read	I	D	;
	I	D	;

	1	2	3	4	5		6	7		8	9	10
Answer
Answer	I	D	P1	P1	P1		;
	I	D	P1	P1	P1		;


IF	Retrieves the transceiver status.												Parameters:
IF													P1
													Specify the frequency in Hz. (11-digit)
													The blank digits must be “0”.
	1	2	3	4	5		6	7		8	9	10	The blank digits must be “0”.
	1	2	3	4	5		6	7		8	9	10	P2
Set													Frequency step size.
													Frequency step size.
													P3
													P3
													RIT/ XIT frequency ±99999 in Hz
													P4
													P4
	1	2	3	4	5		6	7		8	9	10	0: RIT OFF, 1: RIT ON
Read													P5
Read	I	F											0: XIT OFF, 1: XIT ON
			;										0: XIT OFF, 1: XIT ON
			;										P6, P7: Specify the channel bank number. See MC
													command.
	1	2	3	4	5		6	7		8	9	10	P8
	1	2	3	4	5		6	7		8	9	10	0: RX, 1: TX
													0: RX, 1: TX
	I	F											P9
	I	F	P1	P1	P1		P1	P1		P1	P1	P1	Operating mode. See MD commands for details.
													P10
													See FR and FT commands.
	11	12	13	14	15		16	17		18	19	20	See FR and FT commands.
	11	12	13	14	15		16	17		18	19	20	P11
													P11
													Scan status. See SC command.
													Scan status. See SC command.
	P1	P1	P1	P2	P2	P2		P2	P3		P3	P3	P12
	P1	P1	P1	P2	P2	P2		P2	P3		P3	P3	Split operation status. See SP command.
													Split operation status. See SP command.
Answer													P13
Answer													P13
	21	22	23	24	25		26	27		28	29	30	0: OFF, 1: TONE, 2: CTCSS, 3: DCS
													P14
	P3	P3	P3	P4	P5	P6		P7	P7		P8	P9	Tone frequency. See TN command.
	P3	P3	P3	P4	P5	P6		P7	P7		P8	P9	P15
													P15
													Shift status. See OS command.
	31	32	33	34	35		36	37		38	39	40	While operating Sky Command II+, the P2 and P15
													While operating Sky Command II+, the P2 and P15
													parameters become blank. The P2 parameter length
	P10	P11	P12	P13	P14		P14	P15		;			changes to 5 bytes and the P3 parameter length becomes 5
													bytes.


IS	Sets and reads the IF SHIFT function status.												Parameters:
IS													P1
													space
	1	2	3	4	5		6	7		8	9	10	space
	1	2	3	4	5		6	7		8	9	10	P2
Set	I	S											P2
Set			P1	P2	P2		P2	P2		;			0400 ~ 1000 (in steps of 50) in CW mode
			P1	P2	P2		P2	P2		;			0400 ~ 1000 (in steps of 50) in CW mode

	1	2	3	4	5		6	7		8	9	10	IS commands cannot be used while in SSB, FSK, FM, or AM
Read													IS commands cannot be used while in SSB, FSK, FM, or AM
Read	I	S	;										mode.
	I	S	;

	1	2	3	4	5		6	7		8	9	10
Answer
Answer	I	S	P1	P2	P2	P2		P2		;
	I	S	P1	P2	P2	P2		P2		;


KS	Sets and reads the keying speed of the electric keyer.												Parameters:
KS													P1
													010 (min.) ~ 060 (max.) [in WPM]
	1	2	3	4	5		6	7		8	9	10	010 (min.) ~ 060 (max.) [in WPM]
	1	2	3	4	5		6	7		8	9	10
Set	K	S	P1	P1	P1		;
	K	S	P1	P1	P1		;

	1	2	3	4	5		6	7		8	9	10
Read	K	S	;
	K	S	;

	1	2	3	4	5		6	7		8	9	10
Answer
Answer	K	S	P1	P1	P1		;
	K	S	P1	P1	P1		;

125