Kenwood TS-2000, TS-2000X, TS-B2000 manual 139

21 APPENDIX

OS	Sets or reads the offset function status.										Parameters:
											P1
											0: Simplex
	1	2	3	4	5	6	7	8	9	10
											1: +
Set	O	S
			P1	;							2: –
											3: = (All E-types)
	1	2	3	4	5	6	7	8	9	10
Read	O	S	;								Valid only in FM mode. SPLIT function must be OFF.
	1	2	3	4	5	6	7	8	9	10
Answer
	O	S	P1	;
PA	Sets or reads the pre-amplifier function status.										Parameters:
											P1
											0: Pre-amplifier OFF (main transceiver)
	1	2	3	4	5	6	7	8	9	10
											1: Pre-amplifier ON (main transceiver)
Set
	P	A
			P1	;							P2 (Answer only)
											0: Pre-amplifier ON (sub-receiver)
	1	2	3	4	5	6	7	8	9	10
											1: Pre-amplifier OFF (sub-receiver)
Read
	P	A	;								If same frequency band is selected for the main transceiver
	1	2	3	4	5	6	7	8	9	10	and the sub-receiver, both pre-amplifiers are turned ON or
Answer	P	A	P1	P2	;						OFF at the same time.
PB	Sets or reads the DRU-3A or electric keyer playback status.										Parameters:
											P1
											0: Inactive
	1	2	3	4	5	6	7	8	9	10
											1: Playback CH1
Set	P	B
			P1	;							2: Playback CH2
											3: Playback CH3
	1	2	3	4	5	6	7	8	9	10
Read
	P	B	;
	1	2	3	4	5	6	7	8	9	10
Answer
	P	B	P1	;
PC	Sets or reads the output power.										Parameters:
											P1
											005 ~ 100 (in steps of 1)
	1	2	3	4	5	6	7	8	9	10
Set	P	C	P1	P1	P1	;					Refer to the Specifications for the minimum and maximum
											power for each operating frequency band and mode.
	1	2	3	4	5	6	7	8	9	10
Read	P	C	;								If the power is less than 1 watt, the next power level is used.
											ex: 2.5 W = 003, 0.5 W= 001
	1	2	3	4	5	6	7	8	9	10
Answer
	P	C	P1	P1	P1	;
PI	Stores in the Programable Memory channel.										Parameters:
											P1
											1 ~ 5 (PM channel number)
	1	2	3	4	5	6	7	8	9	10
Set
	P	I	P1	;
	1	2	3	4	5	6	7	8	9	10
Read
	1	2	3	4	5	6	7	8	9	10
Answer

131