![](/images/new-backgrounds/1059670/5967035x1.webp)
Accessories
General Information
KitchenAid® Accessories are designed to assure long life. The accessory power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the accessory. The hub and shaft housing are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Accessories require no extra power unit to operate them; the power unit is
English
Accessory Hub Socket
Accessory
Knob Accessory
Power Shaft‡
Accessory
Housing
Notch | Pin |
‡ Not part of | Accessory Shaft | |
Stand Mixer. | ||
Housing |
General Instructions
To Attach
1.Turn speed control to “O”.
2.Unplug Stand Mixer or disconnect power.
3.Loosen accessory knob by turning it counterclockwise. Remove accessory hub cover.
4.Insert accessory shaft housing into
accessory hub, making certain that accessory power shaft fits into square accessory hub socket. It may be necessary to rotate accessory back and forth. When accessory is in proper position, the pin on the accessory will fit into the notch on the hub rim.
5. Tighten accessory knob by turning clockwise until accessory is completely secured to Stand Mixer.
6. Plug into proper electrical outlet.
18