KitchenAid 5KSM150PSC, 5K5SSC, 5K45SSC Using Your KitchenAid Flat Beater Wire Whip and Dough Hook

English

Using Your KitchenAid® Flat Beater,

Wire Whip and Dough Hook

Flat Beater for normal to heavy mixtures:

cakes	biscuits	creamed frostings
quick breads	candies	meat loaf
cookies	mashed potatoes	pie pastry

Wire Whip for mixtures that need air incorporated:

eggs	sponge cakes	egg whites
angel food cakes	heavy cream	mayonnaise
boiled frostings	some candies

Dough Hook for mixing and kneading yeast doughs:

breads	coffee cakes	rolls
buns	pizza dough

Beater to Bowl Clearance

Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far away from the bowl, you can correct clearance easily.

Tilt Head Stand Mixers:

1.Turn speed control to “O”.

2.Unplug Stand Mixer.

3.Lift motor head.

4.Turn screw (A) SLIGHTLY counter clockwise (left) to raise flat beater or clockwise (right) to lower flat beater.

5.Make adjustment with flat beater, so it just clears surface of bowl. If you over

adjust the screw, the bowl lock lever may not lock into place.

NOTE: When properly adjusted, the flat beater will not strike on the bottom or side of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom of the bowl, coating may wear off the beater or wires on whip may wear.

Bowl-Lift Stand Mixers:

1.Turn speed control to “O”.

2.Unplug Stand Mixer.

3.Place bowl-lift handle in down position.

4.Attach flat beater.

5.Turn screw (B) SLIGHTLY counter clockwise (left) to raise flat beater or clockwise (right) to lower flat beater.

6.Place bowl-lift handle in up position to check clearance.

7.Repeat steps 5 and 6 if necessary. NOTE: When properly adjusted, the flat beater will not strike on the bottom or side of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom of the bowl, coating may wear off the beater or wires on whip may wear.

B

A

12