KitchenAid KDRS807 Sealed Surface Burners, To Use the InstaWok Grate, Burner Cap Alignment, A B C

To Use the InstaWok™ Grate:

1.Check that the control knob is in the OFF position and the grate is completely cool before handling.

2.Remove grate from cooktop and flip the grate over so that the wok supports are pointing up.

A

B

C

A. Wok supports pointing up

B. Cooktop grate with InstaWok™ Grate insert (left side of range only)

C. Reversible InstaWok™ Grate insert

3.Place the wok grate within the supports.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

Burner Cap Alignment

Always keep the burner cap properly fitted in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

TripleTier® Flame Burner

A

B	E
C
D

A. TripleTier® flame burner caps

B. Burner base

C. Alignment pins

D.Igniter

E.Gas tube opening

Standard Burner

A

BD

E

C

A. Burner cap

B. Burner base

C. Alignment pins

D.Igniter

E.Gas tube opening

Gas tube opening

Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap.

Burner ports

Check burner flames occasionally for proper size and shape as shown below. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

TripleTier® Flame Burner

A B B

C

A. ³⁄₄" (19.1 mm)

B. ³⁄₈" (9.53 mm)

C. Burner ports

Standard Burner

A

B

A.1-1¹⁄₂" (25-38 mm)

B.Burner ports

9