10
Finger grip
ASSEMBLING THE FOOD PROCESSOR
ASSEMBLING THE FOOD PROCESSOR
Installing the reversible shredding disc
TIP: You may need to turn the disc/adapter until it drops down into place.
Adjusting the slicing thickness
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
1Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.
Thicker
Thinner
1Hold the or reversible shredding disc
by the 2 finger grips with the desired
shredding side facing UP. Insert the disc
adapter into the hole in the bottom of
the disc.
2With the work bowl installed, slide the
drive adapter onto the power shaft.
3Install the work bowl cover, being sure
it locks into place.
Drive
adapter
W10625434A_FINAL.indd 10 1/9/14 10:42 AM