8
ASSEMBLING THE FOOD PROCESSORBefore rst use
Attaching the work bowl
1Grasp the feed tube on the work bowl
cover and turn it clockwise to remove it
from the work bowl.
Before using your Food Processor for the
first time, wash all parts and accessories
either by hand or in the dishwasher (see
“Cleaning the Food Processor” section).
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
1Place the work bowl on the base,
aligning the raised portion with the
indentation on the base. The center
hole should fit over the power shaft.
Power Shaft
2Grasp the work bowl handle and turn
the bowl counterclockwise to lock it
on the base.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
W10625434A_FINAL.indd 8 1/9/14 10:42 AM