2.Remove 5 screws (2 each side and above GFCI) holding the metal front panel and remove panel.

screws

screws

GFCI

front panel

3.Remove terminal box screw and terminal box.

terminal box

screw

terminal

box

4.Remove power cord green ground wire from under green ground screw.

5.Remove twist-on connectors and disconnect black and white wires. Do not reuse connectors.

do not remove this

grommet

power cord

green ground wire

green ground screw

 

6.Use pliers and squeeze locking tab in the power cord strain relief grommet.

locking tab

power cord

7.Remove power cord and grommet.

8.Install a CSA-certified, U.L.- or C-U.L.-listed conduit connector in power cord hole.

conduit

connector

9.Install conduit.

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

10.Route direct wire through conduit and connect wires as follows:

Form ground wire into a hook and wrap clockwise around ground screw under washer. Tighten ground screw securely.

ground wire

direct wire

green ground

screw

Use twist-on connectors of proper size to connect direct wire to 16-gauge wire dishwasher wiring. Connect black wires together and white wires together.

11.Reinstall terminal box.

IMPORTANT: The tabs must be under the terminal box as shown.

terminal box

tabs

8

Page 8
Image 8
KitchenAid KIDS42, KIDS36 installation instructions Remove terminal box screw and terminal box, Install conduit