Klark Teknik DY11 7HJ Introduction, Typical channel I/O connection options, Square ONE Splitter

Introduction

All audio connections are on balanced XLRs (wired pin 2 hot) featuring gold plated connectors. The mic inputs and transformer balanced outputs are mounted on the front panel for easy access, and the two electronically balanced outputs are on the rear panel along with the duplicate set of inputs.

An integral switch mode power supply automatically adapts to mains voltages in the range 100 to 240 volts (50 to 60Hz). An LED on the front panel indicates when power is applied to the unit; there is no mains power on/off switch.

Broadcast	Analogue or digital
	multi-track recorder

Outside

Broadcast

Recording

Mobile

Recording

Studio

Transformer balanced output

Keyboard

Mic

Parallel inputs

Or

FOH console

(for example, the

Midas Verona)

		MON console
		(for example, the
	balanced output	Midas Siena)
Electronically		Electronically
		balanced output

Guitar

Front panel Rear panel

Figure 1: Typical channel I/O connection options

2 Square ONE Splitter