Klark Teknik DY11 7HJ manual Introduction, Using the parallel inputs, Square ONE Splitter

Introduction

Using the parallel inputs

Typically, the mic signals - from different stage locations - are fed to the splitting systems using multi-channel stage boxes and cables. This infrastructure is normally subjected to tremendous stresses during the show and during set up/breakdown, and it is not unusual to develop intermittent faults on some individual signal lines. If this occurs there is normally little time available to de-bug the problem fully before the show. However, the Square ONE Splitter provides a solution for such circumstances by providing an additional parallel input on the front panel of the unit for emergency connection of a spare mic or individual replacement cable. These inputs can also be used for single mic locations, eliminating the requirement to utilise an 8-way stage box and multi-core cable for just one mic.

Square ONE Splitter 5