Klark Teknik DY11 7HJ manual Front panel, TX OUT 1 to TX OUT 8 sockets Eight, Square ONE Splitter

Front panel

Front panel

The front panel of the Square ONE Splitter is divided into three main sections, as follows:

1 2 3

4

1 FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT: Eight-channel section containing the

paralleled inputs and transformer isolated balanced outputs; see “FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT section” on page 9.

2 ACTIVE SPLITTER: Eight-channel section containing the channel controls; see “ACTIVE SPLITTER section” on page 10.

3

4

Phones, power and media split: see “Phones, power and media split section” on page 11.

Four cut-outs for rack mounting.

FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT section

The functions of channels 1 to 8 in this section are similar, although the input of channel 8 is also used for the media split function.

1 TX OUT 1 to TX OUT 8 sockets: Eight

transformer isolated balanced outputs, each with a male XLR chassis connector.

2 IN 1 to IN 8 sockets: Eight electronically

balanced inputs, each with a female XLR chassis connector. Socket IN 8 is one of the two channel 8 media split inputs, the other being on the rear panel.

3 Channel number and write-on panel.

1

2

3

Square ONE Splitter 9