Adjusting the Projector Level

HDP2100 Users Manual

Take note of the following when setting up the projector:

•The projector table or stand should be level and sturdy.

•Position the projector so that it is perpendicular to the screen.

•Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection angle.

•Ensure the cables are in a safe location. You could trip over them.

1.	To raise the level of the projector, lift the projector [A] and press the height-adjuster
	button [B].
	The height adjuster drops down [C].
2.	To lower the level of the projector, press the height-adjuster button and push down
	on the top of the projector.
3.	To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until the
	desired angle has been achieved.

– 13 –

Knoll HDP2100 user manual Adjusting the Projector Level