Knoll Systems LED1081 RS-232 Controller Connection, 11 RS-232 Control System Connection

RS-232 Controller Connection

Connect a PC or home theater control/automation system (if present) to the RS-232 port on the LED1081; see Figure 3-11. Use a standard, 9-pin serial cable, wired straight-through. iKontrol compatible! See www.ikontrol.biz for more information. For more information about using this connection, refer to Serial Interface Specifications on page 58.

5 4 3 2 1

9 8 7 6

	2	Transmit Data
	3	Receive Data
RS-232	5	Ground
	(none of the other pins are used)

to Automation/ Kommand Center Communication Hub

or PC

Figure 3-11: RS-232 Control System Connection

Installation 29