Knoll Systems LED1081 user manual Connecting an External IR Receiver, Connecting to AC Power

Connecting an External IR Receiver

If infrared signals from the remote control cannot reach the projector due to excessive distance or obstructions such as walls or cabinet doors, you can connect an external IR repeater system to the IR INPUT on the LED1081 to extend the range of the remote control. See Figure 3-12. iKontrol compatible! See www.ikontrol.biz for more information.

Knoll IR Sensor

Remote Control

Knoll IR Repeater

(3.5-mm, mini phono plug)

IR INPUT S-VIDEO VIDEO COMPONENT 1 - SCART

Figure 3-12: External IR Receiver Connection

Connecting to AC Power

The LED1081 ships with North American type of AC power cord. source one that is appropriate to your AC standard.

Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); see Figure 2-3. Then, connect the other end to your AC power source.

30Installation